Precautions for socket use
1. Avoid touching the plug with wet hands, as this will cause an electric shock, because water is a conductor.
2. It is strictly forbidden to pull the plug by holding the power cord. When using the socket, some users pay special attention to prevent electric shock. When unplugging the power cord, do not hold the plug, but use the method of pulling the power cord directly. If the frequency is frequent, the power cord and the plug connection position will be disconnected, causing the electrical appliance to fail to supply power normally. The broken position is prone to failure and leakage, causing fire and electric shock hazards.
3. If the socket plug is deformed, replace it immediately. When it is found that the socket is hot or the current is disconnected or ignited, there is a malfunction during use, and the plug is too loose or too tight, immediately suspend use and replace it.
4. Prevent the expired use of the old socket. The socket has its own service life. When the plug is inserted into the socket, the frequent loosening and contact failure problems indicate that the elasticity of the reed inside is poor, and the socket has passed the stage of invalidation. In addition, if the socket is used after expiration, the copper parts inserted in it are oxidized, and the insulation of the outer casing is aging. During use, there may be problems with electricity or contact failure of the outer casing, which may easily bring safety hazards and the possibility of damaging electrical appliances.
